17A-02 Head-up Display

1.1

1

|Test Number|T02

2

|Test Name|Head-Up Display/HMI

3

|Test Leader|Daniel Lee

|Suit|Aouda.S

|Date|06. Jan. 2017

The Head-Up Display/HMI test is directed by the test leader Daniel Lee. It is designed to test the

8

human-machine interface using several different use cases to ensure that operations are intuitive

9

and bugs (logical or technical) are resolved before deployment. The final test iterates through all tabs

10

in the HUD (Head up Display), as well as using all features in each tab in varying orders based on the

11

use case. This test involves eight subtests (A – H). The tested HUD can be navigated by a controller

12

which contains six buttons numbered from 2 to 7.

13

14

**Subtest A:** The proper transition of the buttons through the tabs are tested. Every button (2-7) is

15

tested. Subtest A has a duration of approx. 1 minute.

16

17

**Subtest B:** The correct display of the footer in all tabs is tested. One tab after the other is entered

18

(COMMS, TELEM, PROC, MAP, SETT) and checked for the presence of all footer elements. Subtest B

19

has a duration of approx. 3 minutes.

20

21

**Subtest C:** The correct display of the “Minimap” in all tabs is tested. The first three tabs are entered

22

one after another (COMMS, TELEM, PROC) and verified for the presence of the placeholder element

23

“MiniMap Here”. Then the tabs MAP and SETT are entered to verify that the placeholder element

24

“MiniMap” is not present. Subtest C has a duration of approx. 1 minute.

25

26

**Subtest D:** The completeness of all elements of the communication tab is tested. The COMMS tab is

27

entered and verified for the presence of the element “Cam Stream Here”. Subtest D has a duration of

28

approx. 1 minute.

29

30

**Subtest E: **The completeness of all elements of the telemetry tab is tested. The TELEM tab is entered.

31

Verification if the following elements are present: “Helmet temp.”, “Fan IN 1”, “Fan IN 2”, “Helmet

32

hum.”, “Fan OUT 1”, “Fan OUT 2”, “CO2”, “O2”, “Board temp.”, “CPU temp.”, “Heartrate”. Subtest E

33

has a duration of approx. 2 minutes.

34

35

**Subtest F:** The completeness of all elements of the procedures tab is tested. The PROC tab is entered

36

and the presence of the element “Procs Here” is verified. Subtest F has a duration of approx. 1

37

minute.

38

39

**Subtest G:** The completeness of all elements of the map tab is tested. The MAP tab is entered and

40

the presence of the element “Big Map” is verified. Subtest G has a duration of approx. 1 minute)

41

42

**Subtest H:** The completeness of all elements of the settings tab is tested. The SETT tab is entered and

43

then verified that no placeholder elements are present. Subtest H has a duration of approx. 1

44

minute.

Wiki source code of 17A-02 Head-up Display - HMI