Wiki source code of 17A-01 Humidity Test

Version 3.1 by Barry Bishop on 2017/01/06 19:16

version	line-number	content
1.1	1	\|Test Number\|T01
	2	\|Test Name\|Humidity Test
	3	\|Test Leader\|Christiaan van Ommeren
	4	\|Suit\|Aouda.X
2.1	5	\|Date\|(((
3.1	6	05. Jan. 2017, Subtest C
	7	06. Jan. 2017, Subtest A, B
2.1	8	\\The Humidity test is directed by the test leader Christiaan van Ommeren. The test checks the
	9	humidity resistance of suit elements like the helmet, the PLSS (portable life support system), the
	10	communication system and other hardware. Potential hazards within the tests are condensation and
	11	fire. The Humidity test involves three Subtests (A-C).
	12
	13
	14	Subtest A: The tested temperature is set at 30° Celsius and at a RH (relative humidity) of 75%. This
	15	Subtest checks the temperature of the helmet and the PLSS. Also it checks the functionality of the
	16	communication system, the sensors and other hardware under these circumstances. The test will
	17	take about 8 minutes.
	18
	19	Subtest B: The tested temperature is set at 30° Celsius and at a RH of 100%. The same fields are
	20	tested, but under a higher percentage of relative humidity (temperature of the helmet and PLSS,
	21	communication system, sensor functionality, other hardware).
	22
	23	Subtest C: The tested temperature is set at __//XX° (TBC)//__ Celsius. In this test, the functionality of the
	24	same fields as in Subtest A and B are checked but under light rain conditions. To start the test the
	25	rain simulator has to be checked and the space suit has to be transported outside. The temperature
	26	of the helmet and the PLSS are checked before starting the rain simulation (two meters over the
	27	suit). Now the same checks are carried out (temperature of the helmet and PLSS, communication
	28	system, sensor functionality, other hardware).
	29
1.1	30
2.1	31	)))